
Hazelnut Orchard Establishment in Kyrgyzstan
No Kyrgyz source found names the regions or districts where hazelnut orchards grow, or their cultivars. The one grower described is a home gardener near Bishkek: in 2021 he told 24.kg that hazel does not tolerate waterlogged or saline soils, that young trees should be cut back to 20 to 25 cm to form a bush of 8 to 10 shoots, and that another kind of hazelnut he bought gave worthless, pea-sized nuts in its sixth year.
An undated page of the Osh region's administration describes the climate of its 600 to 1,000 m zone as warm and semi-desert, with short, mild winters (a January mean of -3 to -4 °C) and hot, dry summers (24 to 25 °C in July, up to 40 °C in heat waves). No Kyrgyz source found gives hazelnut bloom dates or frost damage. Oregon State University (OSU) reports that fully elongated catkins can freeze at -9.4 °C, and the female flowers of the most cold-sensitive varieties at -12.2 °C.
For machine harvest, this guide assumes single-trunk trees, which OSU describes as the usual form in the United States, at OSU's standard spacing of 6 x 6 m, with enough room at the orchard edges to turn a tractor and sprayer or harvester into the next row without stopping or backing up. Hazelnut is self-incompatible and wind-pollinated, so OSU advises three pollinizer varieties, early, mid and late, on every third tree in every third row, about 11% of the trees, as nut set falls when pollinizers are more than 15 m away.


Practical Tips for Hazelnut Orchard Establishment
Choose deep, well-drained soil: OSU says hazelnut does not tolerate wet soils in the growing season, and a home gardener near Bishkek warned against saline ground.
Buy young trees with a guarantee, as the home gardener near Bishkek advised in 2021: he warned that dishonest sellers are easy to run into.
Plant three pollinizer varieties, early, mid and late, on every third tree in every third row, as OSU advises: hazelnut cannot set nuts with its own pollen.
Compare site lows at catkin elongation and bloom with OSU's freezing points: -9.4 °C for elongated catkins, -12.2 °C for female flowers of the most sensitive varieties.
Where you plan machine harvest, train single-trunk trees, the US form OSU describes, not the multi-stem bush of the home garden near Bishkek.
Smooth and firm the orchard floor at least a year before the first commercial harvest, as OSU advises, so sweepers can work up to the trunks.

Hazelnut Orchard Care & Maintenance in Kyrgyzstan

No Kyrgyz source found covers hazelnut irrigation, but summers were dry at both WMO stations in 1981 to 2010: Kyrgyzhydromet's normals gave Bishkek 19 mm of rain in July and 14 mm in August, and Osh 10 and 8 mm. OSU links midsummer water stress with greater susceptibility to bacterial blight and says irrigation in the first year lowers tree losses to it, and the Codex code warns that under drought stress aflatoxin contamination is likely to be high.
EPPO lists the brown marmorated stink bug (Halyomorpha halys) in Kazakhstan since 2019 and Uzbekistan since 2020, but not in Kyrgyzstan; OSU notes that its feeding can leave kernels empty, shriveled or corked. EPPO does not list eastern filbert blight, bacterial blight or powdery mildew (Erysiphe corylacearum) for Kyrgyzstan either, a gap in the record, not proof of absence. It records the fall webworm, a hazelnut pest in Türkiye, in eight districts of Chüy region (2020 information).
OSU advises pruning mature trees on a five-year rotation, one-fifth of the orchard each year, notes that all hazelnut varieties produce suckers, and says that flail mowing four to six times a season usually controls weeds. In single-stem orchards planted for machines, the ID DAVID ECOFEED spreads solid manure, the ID DAVID LAT&GO string mower controls weeds without herbicides, the Mañez Lozano Narrow Twister S6 sprays tall, dense canopies and the ID DAVID V1 disc pruner makes vertical and horizontal cuts.

Practical Tips for Hazelnut Orchard Care & Maintenance
Plan drip irrigation for the summer: Kyrgyzhydromet's 1981 to 2010 normals gave Bishkek 19 mm of rain in July and 14 mm in August.
Water young trees from their first season: OSU says irrigation in the first year lowers tree losses to bacterial blight.
Watch for the brown marmorated stink bug: EPPO records it in neighboring Kazakhstan and Uzbekistan and does not list Kyrgyzstan.
If the stink bug arrives, base management on crop stage and degree-days rather than calendar dates alone, as a 2026 OSU article suggests.
Inspect new orchards for eastern filbert blight for 2 years after planting, as OSU advises; EPPO lists it as present only in Canada and the USA.
Prune mature trees on a five-year rotation, one-fifth of the orchard each year, as OSU advises in its training and pruning guide.

Hazelnut Harvesting in Kyrgyzstan

No Kyrgyz source found gives hazelnut harvest dates or describes how hazelnuts are harvested, husked or dried. The only account is the home gardener's near Bishkek, who told 24.kg in 2021 that he has to gather the nuts twice a year, as after an autumn gathering more lie on the grass by spring. In single-stem orchards planted for machines, mechanized harvesting can bring the crop in on time, with less risk of nuts deteriorating while they wait.
The system in this guide does not shake the trees: OSU explains that the thin-barked, shallow-rooted trees would be damaged. The nuts drop onto a level, mown floor and are picked up in several passes; in Oregon they begin to drop in September, and in most years it is October before all have fallen. Kyrgyzhydromet's normals gave Bishkek 18 mm of rain in September and 42 mm in October, and Osh 8 and 34 mm, and British Columbia's guide advises gathering fallen nuts before rainy autumn weather, if possible.
Flory harvesting machinery is available in Kyrgyzstan through OVE Europe for single-stem orchards planted for machines. The Flory 34 Series Sweeper sweeps the nuts into windrows and the 860 Harvester picks them up; the smaller 490 suits hazelnuts in OVE's experience, and Flory lists a mud brush as standard for hazelnuts on the 860. The 1500 Conveyor Cart receives the nuts, the ST14 Shuttle carries them and the 4840 Field Elevator loads trailers for the processing site.

Practical Tips for Hazelnut Harvesting
Plan several pickup passes: OSU notes that most growers harvest multiple times, as nuts fall over a period and the weather can turn too wet.
Keep pickup passes ahead of autumn rain where nut drop allows: Bishkek's 1981 to 2010 normals gave 18 mm of rain in September and 42 mm in October.
Before nut drop, make the floor level and smooth and flail-mow the weeds, as OSU describes, to make the harvest easier.
Keep totes of harvested nuts out of the rain while they wait for processing, as the Pacific Northwest plant disease handbook advises.
Clean and repair harvesters before use, and clean them between orchards, as British Columbia's guide advises, to limit contamination and the spread of disease.
Check tractor power before choosing a harvester: Flory gives 85 HP as the minimum for the 860, and for the 490 in hazelnuts.
Get your recommended harvest setup
Enter orchard size, spacing, terrain, and target throughput—we’ll suggest a practical harvest workflow and equipment lineup.

Hazelnut Post-Harvest Handling & Processing in Kyrgyzstan
No Kyrgyz source found covers husking, drying, storing or cracking hazelnuts, so this section rests on general guidance. British Columbia's guide describes nuts husked, cleaned, washed, sanitized and dried to 5 to 8% moisture within 24 hours of harvest. In OSU research, drying at 43 to 49 °C and 40% relative humidity improved drying efficiency and retained quality, and the Codex code warns that nuts dried in the sun face a greater risk of contamination from fungal growth or pests.
Under UNECE's 2025 standards, in-shell hazelnuts may contain at most 12.0% moisture for the whole nut or 7.0% for the kernel, and kernels at most 6.0%, and in-shell nuts must be at least 12 mm in diameter. The Codex code advises drying to a water activity below 0.70 at 25 °C and storage, if possible, below 70% relative humidity and at 0 to 10 °C.
The technical regulation TR CU 021/2011 'On food safety', adopted in 2011 and applied in Kyrgyzstan, limits aflatoxin B1 in nuts to 0.005 mg/kg and does not name hazelnuts separately. Jessee, whose processing lines OVE Europe supplies, builds drying, in-shell cleaning and sizing, and shelling systems, and it established product lines for hazelnuts in the 1980s.
For general information only. Information may become outdated and does not replace site-specific professional advice. Consult a qualified agronomist and confirm equipment suitability with OVE before acting.


Practical Tips for Hazelnut Post-Harvest Handling & Processing
Dry nuts promptly after harvest: British Columbia's guide gives 5 to 8% moisture within 24 hours, after husking, cleaning and washing.
Where possible, dry nuts in a dryer rather than in the sun: the Codex code warns that sun-dried nuts face a greater risk of contamination from fungal growth or pests.
Consider drying air at 43 to 49 °C and 40% relative humidity: in OSU research, these conditions improved drying efficiency and kept quality.
Keep in-shell nuts and kernels within UNECE's moisture limits: 12.0% for whole in-shell nuts and 6.0% for kernels.
Test every lot for aflatoxin B1: TR CU 021/2011 limits it to 0.005 mg/kg in nuts.
Sort out damaged, rotten, empty and rancid nuts after collection and move them to processing as soon as possible, as the Codex code advises.
Plan your post-harvest line
Estimate tons/day, cleaning & drying capacity, storage needs, and cost/kg—then build your equipment plan in phases.






























