Almond Orchard Establishment in Zimbabwe

Almond Orchard Establishment in Zimbabwe

No Zimbabwean source names almond cultivars, rootstocks or nurseries, and the Flora of Zimbabwe lists ten cultivated Prunus taxa, none of them almond. Commercial temperate fruit was concentrated in the eastern highlands at 1,400 to 1,950 m, with smaller areas east of Harare and in northern Mashonaland at about 1,500 m (a 1985 paper with 1981/82 sales data); a 2009 national report still places it mainly in the cool eastern highlands and lists apples, pears, peaches, apricots, plums and nectarines at the Horticulture Research Institute.

Chilling is the open question. At Marondera, at 1,630 m, a 1995 study gives a long-term average of only 417 hours a year at or below 7.2 °C, generally regarded as marginal for apples, though low-chill apple cultivars cropped heavily in its trials. The 1985 paper on highland temperate fruit names inadequate winter chilling among its climatic problems. Australian guidance lists 23 to 32 chill portions for almond cultivars, a different measure; no source computes almond chill for a Zimbabwean site.

In Australia almonds bloom from late July to early September, a grower reports, and a South African pollination study ran in August and September 1989. If bloom came that early in Zimbabwe, it could meet ground frost: in one report, the Meteorological Services Department (MSD) noted severe ground frost of -4 °C at Nyanga on 6 August 2025. Test cultivars on a small, level plot away from frost pockets, record chill, bloom and frost, and plan rows for machines before planting.

Almond Orchard Establishment in Zimbabwe
Practical Tips for Almond Orchard Establishment icon

Practical Tips for Almond Orchard Establishment

Test almond cultivars on a small plot first: no Zimbabwean source names cultivars, rootstocks or nurseries for the crop.

Record chill and bloom on the trial plot: a 1995 study gives Marondera a long-term average of 417 hours a year at or below 7.2 °C, regarded as marginal for apples.

Plant a compatible pollinizer and bring in 5 to 8 hives per hectare at bloom, as South Africa's Agricultural Research Council recommends.

Prefer deep, well-drained loamy soils, as Australian guidance advises, and test acidity: Eastern Highlands topsoils have a pH of 4.4 to 5.1.

Buy healthy grafted trees from reliable nurseries and keep plant-health documents for any imported planting material.

Plan rows on level ground, headlands and trunk height for shakers and catching frames before planting, and check machine needs with OVE Europe.

Recommended Establishment Stages

Soil & Site Assessment

Soil & Site Assessment

Check soil depth and drainage, avoid frost pockets and wet spots, and test the soil before planting.

Crop, Variety & Nursery Selection

Crop, Variety & Nursery Selection

Choose healthy grafted trees of known cultivars, checked for variety, roots and plant health.

Orchard Layout & Machinery Planning

Orchard Layout & Machinery Planning

Plan rows, headlands and access lanes so shakers, catching frames, sweepers, harvesters and shuttles can work.

Irrigation System Design

Irrigation System Design

Design drip lines for the water available, soil, spacing and slope, with good filtration and even pressure.

Land Preparation Before Planting

Land Preparation Before Planting

Rip compacted layers, level where needed, and mark rows, access lanes and headlands before planting.

Irrigation Installation & Commissioning

Irrigation Installation & Commissioning

Install mains, laterals, filters and valves, then test pressure and flow before planting day.

Planting (Preferably with a Planting Machine)

Planting (Preferably with a Planting Machine)

Plant in straight rows at the planned spacing, with GPS marking where possible, and water each tree at once.

Almond Orchard Establishment in Zimbabwe

Almond Orchard Care & Maintenance in Zimbabwe

Almond Orchard Care & Maintenance in Zimbabwe

No Zimbabwean guidance on almond irrigation or nutrition was found. In the highlands rain falls mainly from October to April, with considerable local and seasonal variation, so temperate fruit needs supplementary irrigation or mulching, a 1985 paper notes. MSD normals give Marondera at most 10.1 mm of rain a month from May to September (1961 to 1990), and Australian guidance puts almond water needs at a minimum of 8.5 to 10 megaliters per hectare.

No Zimbabwean source on almond pests or diseases was found. EPPO lists bacterial spot (Xanthomonas arboricola pv. pruni) as present in Zimbabwe with a restricted distribution, on information dated 1986, gives American brown rot (Monilinia fructicola) as absent, an invalid record, and does not list the peach twig borer, which does not prove it is absent. University of California guidance says warm, rainy weather favors anthracnose.

Hailstorms are commonest in early summer and cause appreciable losses to temperate fruit in the highlands, the same paper notes, and University of California guidance says hulls are vulnerable to hull rot from hull split until they dry. For care work, the ID DAVID ECOFEED spreads solid manure, the ID DAVID LAT&GO string mower controls weeds without herbicides, the Mañez Lozano Narrow Twister S6 sprays tall, dense canopies and the ID DAVID V1 disc pruner makes vertical and horizontal cuts.

Recommended Orchard Care & Maintenance Stages

Soil Cultivation Between Rows (Rotary Tiller)

Soil Cultivation Between Rows (Rotary Tiller)

Loosens compacted soil between rows where needed, in shallow passes, and leaves it level for harvest.

Fertilization: ID DAVID ECOFEED Spreader

Fertilization: ID DAVID ECOFEED Spreader

Trailed spreader for solid manure from 2.5 to 13 m³, with accessories for surface or localized application.

Learn more →
Mulching Between Rows

Mulching Between Rows

Optional: chops grass and prunings into a mulch that shades the soil and holds moisture in dry spells.

Weed Control: ID DAVID LAT&GO String Mower

Weed Control: ID DAVID LAT&GO String Mower

String mower that mulches weeds without herbicides, with rotor speed adjustable to protect young plants.

Learn more →
Herbicide Application: Mañez Lozano Atila-D

Herbicide Application: Mañez Lozano Atila-D

Optional front-mounted hydraulic herbicide boom for rows where mechanical weeding is not enough.

Tree Spraying: Mañez Lozano Narrow Twister S6

Tree Spraying: Mañez Lozano Narrow Twister S6

Narrow trailed airblast sprayer for tall trees and dense canopies, with a 1,500, 2,000 or 3,000 liter tank.

Learn more →
Pruning: ID DAVID V1 Disc Pruner

Pruning: ID DAVID V1 Disc Pruner

Disc pruner for vertical and horizontal cuts from 0.75 m high, with a hydraulic motor on each disc.

Learn more →
Practical Tips for Almond Orchard Care & Maintenance icon

Practical Tips for Almond Orchard Care & Maintenance

Plan drip irrigation for the dry season: Marondera averages at most 10.1 mm of rain a month from May to September (1961 to 1990).

Watch frost forecasts at bloom: MSD reported severe ground frost of -4 °C at Nyanga on 6 August 2025.

Watch for anthracnose in warm, wet weather and prune out dead, infected wood, as University of California guidance advises.

Limit hull rot by reducing irrigation at the onset of hull split and avoiding standing water, as University of California guidance advises.

Control weeds without herbicides with a string mower such as the ID DAVID LAT&GO, and keep the orchard floor level for harvest.

Spray tall, dense canopies evenly with a narrow trailed airblast sprayer such as the Mañez Lozano Narrow Twister S6.

Almond Harvesting in Zimbabwe

Almond Harvesting in Zimbabwe

Almond Harvesting in Zimbabwe

No Zimbabwean source describes an almond harvest or gives bloom or harvest months. In Australia, also in the southern hemisphere, the almond harvest usually runs from February to May (USDA, 2015), and New South Wales guidance places it in February, once the hulls have cracked. In orchards planted for machines on suitable ground, mechanized harvesting can bring the crop in on time, with less risk of nuts deteriorating while they wait.

No reliably hot, dry harvest season can be shown: by southern-hemisphere timing the harvest would fall in the rains, when Marondera averages 149.1 mm on 12 rain days in February and 90.3 mm on 9 in March, with a February mean maximum of 24.2 °C (MSD normals, 1961 to 1990). The Codex code prefers catching frames or sheets and asks that fallen nuts be removed as soon as possible, so this guide shows prompt pickup, with hulling and drying at once, beside catching frames.

Flory harvesting machinery is available in Zimbabwe through OVE Europe for both systems, for orchards planted for machines. On the ground, the VR700 Shaker, 34 Series Sweeper and 860 Harvester (or the smaller 490) work with the 1500 Conveyor Cart and ST14 Shuttle. Off the ground, the Flory COE C7 Shaker and L2 Receiver catch the almonds in a frame around the trunk, the Flory COE B8 Cart and VS25 Shuttle carry them, and the 4840 Field Elevator loads trailers in both systems.

Almond Harvest Workflow (Recommended Equipment)

On-ground Shaking: Flory VR700 Shaker

On-ground Shaking: Flory VR700 Shaker

Side-mount trunk shaker with customizable ESHAKE patterns and touch-screen controls, built to protect trees.

Learn more →
On-ground Sweeping: Flory 34 Series Sweeper

On-ground Sweeping: Flory 34 Series Sweeper

Cab sweeper that sweeps nuts from right to left, with flotation tires and optional 4-wheel drive.

Learn more →
On-ground Pickup: Flory 860 Harvester

On-ground Pickup: Flory 860 Harvester

PTO harvester that picks up and cleans nuts with minimal dust; the 490 is a smaller, cost-effective option.

Learn more →
On-ground Receiving: Flory 1500 Conveyor Cart

On-ground Receiving: Flory 1500 Conveyor Cart

Receives nuts from the harvester and unloads them quickly into shuttles; a stick remover is optional.

Learn more →
On-ground Logistics: Flory ST14 Shuttle

On-ground Logistics: Flory ST14 Shuttle

High-capacity in-orchard shuttle with variable-speed augers, articulated steering and air-ride suspension.

Learn more →
Off-ground Shaking: Flory COE C7 Shaker

Off-ground Shaking: Flory COE C7 Shaker

Catching-frame shaker with fully repeatable shake patterns; pairs with the L2 Receiver for off-ground harvest.

Learn more →
Off-ground Receiving: Flory COE L2 Receiver

Off-ground Receiving: Flory COE L2 Receiver

Catching-frame receiver for the C7, with a variable-speed trash blower and an elevator for bins or bulk carts.

Learn more →
Off-ground Buffer Cart: Flory COE B8 Cart

Off-ground Buffer Cart: Flory COE B8 Cart

High-capacity bulk cart of about 11.9 m³ with metered belt unloading; a mesh chain for almonds is optional.

Learn more →
Off-ground Logistics: Flory VS25 Shuttle

Off-ground Logistics: Flory VS25 Shuttle

Low-profile shuttle with a nut tank of about 12.7 m³, car-style controls and fast side-dump unloading.

Learn more →
Field Elevator for Both Systems: Flory 4840

Field Elevator for Both Systems: Flory 4840

Loads nuts from shuttles into trailers on a 1.2 m adjustable-speed belt, with wireless remote control.

Learn more →
Practical Tips for Almond Harvesting icon

Practical Tips for Almond Harvesting

Time shaking by hull split on each cultivar: University of California guidance advises harvesting when 95 to 100% of hulls have split.

Plan for rain at harvest: at Chipinge, in the east, February averages 204.1 mm on 12 rain days and March 142.5 mm on 10 (1961 to 1990).

Pick up promptly after shaking: University of California guidance notes that ant damage to nuts increases the longer they lie on the ground.

If rain wets almonds on the ground, do not stockpile them wet: University of California guidance warns of mold and concealed damage.

Where almonds must stay off wet ground, use catching frames: the Flory COE C7 Shaker works with the L2 Receiver.

Use shakers, frames and sweepers only in level orchards planted for machines, never on steep, landslide-prone slopes or scattered trees.

Get your recommended harvest setup

Enter orchard size, spacing, terrain, and target throughput—we’ll suggest a practical harvest workflow and equipment lineup.

Almond Post-Harvest Handling & Processing in Zimbabwe

Almond Post-Harvest Handling & Processing in Zimbabwe

No Zimbabwean source describes almond hulling, drying or storage. The Codex code of practice on aflatoxins in tree nuts, which covers almonds, advises hulling as soon as possible after harvest and drying hulled nuts to a water activity below 0.70 at 25 °C, and warns that nuts dried in the sun are at greater risk. Promptly picked or frame-caught almonds should therefore be hulled at once and dried off the ground before storage.

The Codex code also advises storage, if possible, below 70% relative humidity and at 0 to 10 °C, protected from rain, rodents and birds. No Zimbabwean almond standard was found, and sources report Zimbabwe's aflatoxin limits inconsistently; for almonds sold to consumers or used in food in the EU, Regulation (EU) 2023/915 sets 8.0 µg/kg of aflatoxin B1 and 10.0 µg/kg in total.

Zimbabwe imported more almonds than it exported in every year from 2015 to 2024, mainly from South Africa and Belgium; its only recorded export was 240 kg of shelled almonds in 2015 (UN Comtrade via WITS). Jessee, whose processing lines OVE Europe supplies, builds hulling, drying, in-shell cleaning and sizing, and shelling systems; its Airlegs nut cleaner was developed for the almond industry.

For general information only. Information may become outdated and does not replace site-specific professional advice. Consult a qualified agronomist and confirm equipment suitability with OVE before acting.

Almond Post-Harvest Handling & Processing in Zimbabwe
Practical Tips for Almond Post-Harvest Handling & Processing icon

Practical Tips for Almond Post-Harvest Handling & Processing

Hull promptly picked or frame-caught almonds while the hulls are fresh, then dry the nuts in the shell before storage.

Dry hulled nuts to a water activity below 0.70 at 25 °C, the safe level in the Codex code of practice.

Dry almonds off the ground and out of the rain: the Codex code warns that nuts dried in the sun are at greater risk.

Store dried nuts, if possible, below 70% relative humidity and at 0 to 10 °C, protected from rain, rodents and birds, as the Codex code advises.

Do not send rain-wet almonds straight to the huller: University of California guidance notes that wet nuts will not hull cleanly.

Test lots bound for the EU against Regulation (EU) 2023/915: 8.0 µg/kg of aflatoxin B1 and 10.0 µg/kg in total for almonds sold to consumers or used in food.

Recommended Post-Harvest Handling & Processing Stages

Receiving / Intake

Receiving / Intake

Weighs each load on arrival, records the block and cultivar, and checks moisture before hulling.

Pre-Cleaning

Pre-Cleaning

Removes leaves, sticks, soil and stones, which come mostly with ground pickup, before hulling.

Hulling

Hulling

Takes off the fresh hulls of promptly picked or frame-caught almonds before the nuts are dried.

Drying

Drying

Dries hulled, in-shell almonds to a water activity below 0.70, the safe level in the Codex code of practice.

Storage

Storage

Keeps dried almonds by lot and cultivar in a dry, clean store, protected from pests and rodents.

Cracking and Kernel Separation

Cracking and Kernel Separation

Cracks the shells by machine and separates kernels, the form of most of Zimbabwe's almond imports.

Sizing and Grading

Sizing and Grading

Sizes and sorts kernels, or in-shell almonds for the in-shell market, to buyers' specifications.

Finished Products

Finished Products

Graded kernels and in-shell almonds, packed and labeled by lot for local buyers.

Plan your post-harvest line

Estimate tons/day, cleaning & drying capacity, storage needs, and cost/kg—then build your equipment plan in phases.